Modine Commercial Workspace Heater - 200K BTU/Direct Spark Ignition/LP/Separated Combustion/Single Stage w/Aluminized Steel Heat Exchanger

FREE SHIPPING
CLEARANCE SALE
80 Peoples are also watching.
Brand: Modine
$3,874.00
$4,000.00
$3,874.00
Subtotal: $3,874.00
clearance sale ends in
00 Hours
00 Minutes
00 Seconds
authorized dealer, shop your favorite brand.
Expert Support,

Dial +1 (888) 575-2099

Limited Supply,

grab it before it's gone.

Lowest prices,

As low as possible.

All Items are brand New,

Never used.

Modine Commercial Workspace Heater - 200K BTU/Direct Spark Ignition/LP/Separated Combustion/Single Stage w/Aluminized Steel Heat Exchanger

Modine Commercial Workspace Heater - 200K BTU/Direct Spark Ignition/LP/Separated Combustion/Single Stage w/Aluminized Steel Heat Exchanger

$4,000.00 $3,874.00

Modine Commercial Workspace Heater - 200K BTU/Direct Spark Ignition/LP/Separated Combustion/Single Stage w/Aluminized Steel Heat Exchanger

$4,000.00 $3,874.00

Recently Viewed Products

Modine Commercial Workspace Heater - 200K BTU/Direct Spark Ignition/LP/Separated Combustion/Single Stage w/Aluminized Steel Heat Exchanger

The Modine Commercial LP Workspace Heater is the ideal solution for keeping your workspace safe and comfortable in challenging environments. This industrial-grade heater boasts a dependable 200,000 BTU output, efficiently heating a variety of workspaces including garages, workshops, and factories

Features
  • Specifically designed for environments with hostile atmospheric conditions, such as chemicals, high humidity or negative pressure

  • Combustion air is brought in from outside the heated area - either from outdoor air or from an adjacent room - eliminating the need to use contaminated indoor air for combustion

  • In-shot burners fire each heat exchanger tube for reliable performance, ease of service and decreased noise on ignition

  • Same-size vent and combustion air inlets throughout product line makes installation easier

  • Longer allowable vent lengths (up to 50′ vs 30′) versus previous line, providing greater installation options

  • Round vent pipe and combustion air inlet pipe connection

  • Automatic reset vent pressure switch is designed to prevent operation of the main burner in the event there is restricted venting of the flue

  • Integrated direct spark control board provides digital control of the air mover, inducer, ignition, gas valve and flame sense

  • Control Step Down Transformer used to step down from 115v to 24v for the gas controls, fan delay relay, field supplied motor start and more

  • Remote flame sensor verifies ignition of all burners, monitors the flame single and communicates with the integrated circuit board

  • High limit control switch is mounted in the air stream and will shut off the gas supply in the event of overheating

  • 4" vent & combustion air connection

  • Liquid Propane

  • 200,000 BTU

  • Direct spark ignition

  • Single stage - on/off operation

  • Aluminized steel heat exchanger

Specifications
Fuel Type Propane
Control Type Electronic/IPI
Color/Finish Gray
Size 42.53"W x 25.81"T x 32.83"D

What Our Experts Think

The Modine Commercial Workspace Heater - 200K BTU with Direct Spark Ignition, LP (Liquefied Petroleum) gas, and Separated Combustion is a high-performance heating solution designed for large, demanding commercial workspaces. Here’s why it’s a top choice:

  • Powerful Heating Capacity: Provides 200,000 BTUs, making it ideal for heating expansive warehouses, workshops, or industrial environments.
  • Direct Spark Ignition: Ensures reliable and efficient ignition, delivering consistent performance even in varying conditions.
  • LP (Liquefied Petroleum) Gas-Powered: Offers flexibility for areas where natural gas isn’t available, making it suitable for off-grid or remote locations.
  • Separated Combustion Design: Prevents exhaust gases from mixing with indoor air, improving safety and indoor air quality.
  • Single-Stage Operation: Simple and easy-to-use heating with reliable performance and minimal maintenance.
  • Aluminized Steel Heat Exchanger: Built for durability and corrosion resistance, ideal for long-lasting performance in tough commercial environments.
  • Flexible Installation: Compact size allows for wall or ceiling mounting, optimizing space usage in commercial settings.
  • Energy Efficient: Combines separated combustion and optimized design for maximum fuel efficiency and lower emissions.
  • Durable & Long-Lasting: Constructed with high-quality materials to ensure long-term reliability and performance.
Q&A

Q: What is the Modine Commercial Workspace Heater 200K BTU LP with separated combustion?
A: The Modine 200K BTU LP workspace heater is designed for commercial and industrial spaces, such as warehouses and workshops, featuring high-efficiency propane heating with separated combustion technology and an aluminized steel heat exchanger for reliable performance.

Q: What are its key features?
A: Key features include 200,000 BTU output, direct spark ignition, single-stage operation, separated combustion for safe and efficient heating, and an aluminized steel heat exchanger for durability and effective heat transfer.

Q: What is separated combustion, and why is it important?
A: Separated combustion keeps combustion gases vented outside, preventing harmful fumes from mixing with indoor air, ensuring safe and efficient operation.

Q: How does the aluminized steel heat exchanger contribute to performance?
A: The aluminized steel heat exchanger provides excellent corrosion resistance and maintains efficient heat transfer in demanding environments.

Q: Is this heater energy-efficient?
A: Yes, the high-efficiency design with separated combustion and aluminized steel heat exchanger helps maximize heat output while minimizing fuel usage, resulting in cost savings and better energy efficiency.

Q: Why choose the Modine 200K BTU LP Heater with separated combustion?
A: Its powerful output, safe combustion, energy efficiency, and durable construction make it ideal for commercial spaces that require reliable and effective heating solutions.

Maintenance Tips
  • Daily Cleaning: Wipe down the exterior of the heater to remove dust, dirt, and debris.
  • Inspect Heat Exchanger: Check the aluminized steel heat exchanger for corrosion, buildup, or damage. Clean it periodically to ensure efficient heat transfer.
  • Burner Maintenance: Inspect the burner for soot or debris buildup and clean it as needed to maintain optimal combustion performance.
  • Check Ignition System: Test the direct spark ignition for consistent and reliable operation.
  • Inspect LP Gas Connections: Regularly check LP gas fittings and connections for leaks using a soapy water solution.
  • Exhaust Venting: Ensure the venting system is clear of blockages or leaks to safely expel combustion gases.
  • Clean Condensate Drain: If applicable, check and clear the condensate drain regularly to prevent clogs.
  • Filter Maintenance: Replace or clean air filters as recommended to maintain proper airflow.
  • Seasonal Maintenance: Schedule professional servicing at least once a year to keep the unit running efficiently and safely.
  • Emergency Shutoff Test: Verify that the emergency shutoff system functions properly in case of malfunction.

Related Products