Modine Hot Dawg Garage Heater - 125K BTU/Direct Spark Ignition/LP/Separated Combustion/Single Stage w/Aluminized Steel Heat Exchanger

FREE SHIPPING
CLEARANCE SALE
80 Peoples are also watching.
Brand: Modine
$3,156.00
$3,300.00
$3,156.00
Subtotal: $3,156.00
clearance sale ends in
00 Hours
00 Minutes
00 Seconds
authorized dealer, shop your favorite brand.
Expert Support,

Dial +1 (888) 575-2099

Limited Supply,

grab it before it's gone.

Lowest prices,

As low as possible.

All Items are brand New,

Never used.

Modine Hot Dawg Garage Heater - 125K BTU/Direct Spark Ignition/LP/Separated Combustion/Single Stage w/Aluminized Steel Heat Exchanger

Modine Hot Dawg Garage Heater - 125K BTU/Direct Spark Ignition/LP/Separated Combustion/Single Stage w/Aluminized Steel Heat Exchanger

$3,300.00 $3,156.00

Modine Hot Dawg Garage Heater - 125K BTU/Direct Spark Ignition/LP/Separated Combustion/Single Stage w/Aluminized Steel Heat Exchanger

$3,300.00 $3,156.00

Recently Viewed Products

Modine Hot Dawg Garage Heater - 125K BTU/Direct Spark Ignition/LP/Separated Combustion/Single Stage w/Aluminized Steel Heat Exchanger

The Modine Hot Dawg LP Garage Heater is your solution for conquering cold in large workspaces. This industrial-grade heater boasts a remarkable 125,000 BTU output, efficiently heating workshops, warehouses, service bays, and similar areas. Unlike traditional heaters, the Hot Dawg LP tackles tough conditions with its innovative separated combustion system, making it ideal for environments prone to dust, dirt, or high humidity.

Features
  • Draws combustion air from outside the workspace, ensuring the unit always has plenty of fresh, clean air to breathe

  • Reduces common concerns about dusty, dirty, or humid applications, providing more exceptional durability and reduced maintenance

  • The sealed compartment protects the combustion gas valve, ignition control, manifold, and burners from the environment

  • Factory assembled, certified separated combustion saves installation time

  • Low-profile, lightweight design easily installs 1″ from the ceiling with only two angle brackets (sold separately)

  • Field fuel conversion kits are available

  • Finger-proof fan guards on all units

  • Reduces the need for maintenance with the permanently lubricated motor

  • 100% shut-off with continuous retry to allow for safe ignition in the event the unit doesn’t light on the first try

  • Power vented model simplifies side-wall or roof venting with the small-diameter vent pipe

  • 4" vent & combustion air connection

  • Liquid Propane

  • 125,000 BTU

  • Direct spark ignition

  • Single stage - on/off operation

  • Aluminized steel heat exchanger

Specifications
Fuel Type Propane
Control Type Electronic/IPI
Color/Finish Gray
Size 35.5"W x 20.5"T x 31"D

What Our Experts Think
  • High Heating Power: With 125,000 BTU output, this heater is ideal for larger garages, workshops, or commercial spaces, providing robust warmth.
  • Separated Combustion: Draws combustion air from outside, ensuring cleaner, fresher air inside the workspace by preventing contamination.
  • Durable Aluminized Steel Heat Exchanger: Offers excellent corrosion resistance and ensures long-term efficiency and reliable heating.
  • Direct Spark Ignition: Efficient and quick start-ups, reducing propane consumption and maximizing energy savings.
  • LP Gas Compatibility: Designed for use with liquid propane, perfect for spaces without access to natural gas.
  • Single-Stage Simplicity: Easy to operate with straightforward, reliable heating performance.
  • Space-Saving and Quiet: Compact design and low noise levels make it ideal for use in confined spaces.
Q&A

Q: What is the heating capacity of this model?
A: The Modine Hot Dawg 125K BTU delivers 125,000 BTU, perfect for heating large spaces up to 2,500 sq. ft.

Q: What type of ignition system does it use?
A: It uses Direct Spark Ignition (DSI) for reliable and consistent startups.

Q: What fuel type is required?
A: This unit is designed for Liquid Propane (LP) fuel.

Q: What is separated combustion, and why is it beneficial?
A: Separated combustion draws air from outside for combustion, improving indoor air quality and ensuring higher efficiency.

Q: What is the heat exchanger made of?
A: The heat exchanger is constructed from aluminized steel, offering excellent durability and resistance to corrosion.

Q: Is it ideal for smaller spaces?
A: While designed for larger spaces, it can be used in smaller areas with proper ventilation and installation.

Q: Does it operate in a single stage?
A: Yes, this heater operates at a single, consistent heat level, providing reliable performance.

Q: Should I hire a professional for installation?
A: Yes, professional installation is recommended for safe operation and proper venting.

Q: What safety features are included?
A: It includes flame failure shutoff and overheat protection to ensure safe operation.

Q: Is it quiet when operating?
A: Yes, this model is designed for quiet, efficient heating, making it suitable for both home and work environments.

Maintenance Tips
  • Clean Regularly: Clean both the interior and exterior of the unit to remove dust and debris that can affect performance.
  • Inspect Gas Lines: Check LP gas connections regularly for leaks using a soapy water solution. Repair any issues immediately.
  • Test the Ignition System: Test the direct spark ignition system every month to ensure reliable operation.
  • Check Air Intake and Exhaust: Since the heater uses separated combustion, ensure both the intake and exhaust pipes are clear of debris or blockages for safe, efficient operation.
  • Monitor Flame Quality: Ensure the burner flame is blue and steady; yellow or fluctuating flames indicate the need for burner cleaning or maintenance.
  • Inspect Aluminized Steel Heat Exchanger: Examine the heat exchanger annually for signs of wear, corrosion, or damage to maintain optimal heating performance.
  • Check for Proper Combustion: Regularly ensure that separated combustion is functioning properly, with no blockage in intake and exhaust pathways.
  • Annual Professional Service: Schedule an annual inspection by a certified technician to ensure all components, including the burner, ignition, and heat exchanger, are functioning optimally.

Related Products