Yardbeast 3” wood Chipper Shredder is a residential grade wood chipper shredder with a chipping capacity up to 3” and a shredding capacity up to 5/8”. It has 2 dedicated hoppers, for chipping and shredding. Is ideal for small or medium properties.
You can comfortably tow by hand to one job to another. The centrifugal clutch provides a shock load protection that improves the engine’s operational life. The dual tool steel blades makes the chipping much easier.
Features
- Engine For The Pro’s: Quad-Clean™ all-season four-stage cyclonic air filter – effective engine protection for tough-and-dirty conditions. Large-capacity fuel tank means more time working, less time filling.
- Ferocious Rotor: The heart of the chipper, fabricated of thick gauge steel equipped with 4 separate arrays of our unique design FULLSHRED Flail technology, a hybrid between chopping with machete-like sharpness while busting branches like a hammer at the same time. This rotor swallow branches and leaves like no other.
- Perfect Mulch: The 2050 come standard with a 7/8″ diameter hole screen size, chewing out approx. dime-sized wood chips.
- Samurai Blade: 2050 boasts two super sharp D2 Tool Steel Blades for improved chipping performance, taking this chipper to a professional-grade level making up to 4,600 cuts per minute.
- Wide Hoppers: Unless there is intensive pruning, branches and twigs come with many twisted sections making chipping a difficult task. At Yardbeast our chutes are always wide feed so the less pruning involved, the more efficient you will be on your job.
- 2-year residential/90 day commercial warranty make this engine a true companion to venture out in the woods.
Specifications
| Chipping capacity |
3" |
| Shredding capacity |
5/8" |
| Rotor RPM |
2,300 |
| Rotor Weight |
32 lbs |
| Blade |
2 - Hardened Steel treated blades |
| Blade dimensions |
4.40" x 2.32" |
| Rotor Construction |
1/4" thick disc with 1/4" thick rotor vanes and hammer rods |
| Flywheel |
13.46" |
| Feed Hopper |
6.5" x 6" |
| Frame construction |
10-ga steel |
| Bearing units |
SKF® bearings units |
| Discharge height |
Ground floor |
| Control |
Discharge deflector |
| Chipper Weight (w/engine) |
260 lbs |
| Make |
Kohler CH395 277 cc engine |
| RPM |
3,600 |
| Torque |
13.9ft-lbs gross torque |
| Dry Weight |
61 Lbs |
| Displacement |
277cc |
| Oil Capacity |
1.4 quarts (1.3 liters) |
manual
Operating Manual
Specifications